The CompactLine drum filling machine type 31 is designed for the fully automatic and calibrated filling of 216.5l drums. Open drums are automatically positioned and filled in the working station. A roller conveyor moves the drums through the filling machine and a drum lift raises the drums from the conveyor onto the weigh scale.
The CompactLine drum filling machine type 32with two stations working in parallel is designed for the fully automatic and calibrated filling of drums. The drums are automatically positioned and de-bunged. At the same time, an open drum is filled in the filling station. A chain conveyor moves the drum in single cycle through the filling machine and feeds them to the working stations.
The CompactLine drum filling machine type 33 with three stations working in parallel is designed for the fully automatic and calibrated filling of drums. In the first station, the drums are automatically positioned and de-bunged. At the same time, an open drum is filled in the filling station and a filled drum is closed in the closing station. A chain conveyor moves the drum in single cycle through the filling machine and feeds them to the working stations. Instead of the closing station, a 2 nd filling station can be installed so that the machine can be operated with preand final filling to increase the output.
Essential accessories are drip collecting, gas exhaust, even directly at the bunghole, overflow signals, collecting basin, earthing device, inert gas purging via double jacket filling lance, base height adjustment for drum heights between 810 mm and 970 mm and devices for manual drum closing.
The benefits
- Compact ready-to-use machine which can control one roller conveyor each in the in-feed and out-feed area
- Stainless steel and acid protection design available
- Touch panel as operating interface with integrated weigh scale terminal and monitoring
- 255 product files
- Tare check, flow rate control, fill time monitoring
- Below-surface filling with lance raise by weight
- Product hose with direct filling valve connection
- ATEX design possible, if no de-bunging tool is installed, drum inertising is possible in the positioning station